30
VERSION V4.1
6.
Uninstalling the
Carry ’Box
Kid module
•
Detach the Velcro straps from the axle;
•
Detach the Velcro from the upper crossbar;
•
Detach the Velcro rear the AddBike, at the bottom and on the side;
•
Loosen and remove all accessible straps from the hammock (bottom rear, back top ,
and the long straps passing inside the module) ;
•
Detach the Velcro along the upper tubes;
•
Detach the U-shaped Velcro around the middle crossbar;
•
Remove from the metal frame the entire textile envelope;
•
Loosen and remove the remaining straps from the hammock (strap on middle
crossbar and crotch strap);
•
Remove the hammock from the metal frame;
•
Take off the screws holding the three transverse bars and release the latter from the
metal frame;
•
Take off the screws and nuts attaching the upper tubes to the backrest and remove
these upper tubes;
•
Take off the screws and nuts attaching the bottom tubes to the seat and remove
these bottom tubes;
•
Return the protective caps, screws and nuts to their position on the backrest;
•
Return the protective caps, screws and nuts to their position on the seat;
7.
Cleaning
Your Carry'Box Kid can be cleaned simply with a sponge or with clean water. Once
washed, let the textile part dry before storing.
Figure 16 - Indication of textile cleaning
Store your Carry'Box Kid module in a shelter protected from bad weather and harmful
substances.
If your AddBike is equipped with stainless steel connection sleeves,
loosen the screw (without nut), remove the bars, tighten back the
screws (without nut and plastic caps).
