VERSION V4.1
25
•
Attach the fabric from the bottom of the module to the fabric on the back with the
two straps of Velcro available on both sides of the back plate;
Figure 31 Fixing the rear down fabric with the Velcro
•
Put the fabric from the top of the module around the upper crossbar and fix it with
the Velcro strip;
Figure 32 - Placing the top of the fabric
Make sure the two Velcro strips are well aligned at this point so as not to
interfere with the movement of the
Addbike’s back
plate.
To check, make
a large movement from left to right with the handlebars of your bike.
