2018-Current Ford F150
Stealth™ R Front Bumper Installation Instructions
Addictive Desert Designs® | Page 7
ADDICTIVE DESERT DESIGNS
®
19. Set the bumper in place on your vehicle. Install the OEM Stud Assembly in the top two mounting holes on
each side. Make sure the upper inner hole is used to mount both the bumper and the Winch Plate. Then install
the supplied 1/2" Button Head Bolts (x2), 1/2" Washers (x4), and 1/2" Lock Nuts (x2) in each lower mounting
hole. Leave these bolts loose for now. (Fig M)
Fig M
20. Center the bumper left to right and align it so it is straight in relation to the grille/valance. Then, torque the
supplied mounting bolts to 70 foot pounds and the OEM bolts to OEM torque spec.
21. Trim your inner fender liner to preference.
22. Stand back and enjoy your new ADD Stealth™ R Front Bumper.
23. Check and re-tighten, if needed, all mounting bolts after 100 miles and periodically thereafter.
