2018-Current Ford F150
Stealth™ R Front Bumper Installation Instructions
Addictive Desert Designs® | Page 6
ADDICTIVE DESERT DESIGNS
®
17. On the bottom side of the frame rail, there is a series of holes. Install one of the supplied 3/8" U-Nuts into
the third hole back. Then, repeat this step on the other frame rail. (Fig K)
Fig K
18. Bolt your Winch Mounting Plate to your vehicle's frame. Use the tow hook bolts you saved in Step 6 in the
first two holes on the bottom side of the frame. Use the supplied 3/8" Grade 8 Bolts (x2) and 3/8" Washers (x2)
in the third set of holes on the bottom side of the frame. Once all bolts have been loosely installed, go back and
torque the supplied 3/8" bolts to 30 foot pounds and the OEM bolts to OEM torque spec. (Fig L)
Fig L