ADD-A-BATHROOM Pty Ltd. Specifications and details subject to alteration without notice. (c) 2019
No warranty is expressed or implied by the publication or use of this guide. Page 1 of 8
Unit 1, 18 Francis Rd. Wingfield. South Australia. 5013
Ph: 1300 559 121
www.addabathroom.com.au
Installation guide for Add-A-Bathroom 8 panel flat pack tile look bathrooms.
FP800T; FP900T; FP1000T; FP1200T; FP1400T (with door opening)
Please read the entire guide prior to commencement of assembly or installation.
Note that this guide is provided for general information purposes only and should not be relied upon
without professional advice about your personal situation and installation requirements. As this guide
does not take personal circumstances or local regulations into account and as any installation is beyond
the control of Add-A-Bathroom, no responsibility is accepted nor warranty implied by Add-A-Bathroom
(or its affiliated entities) by the publishing or use of this guide.
Add-A-Bathroom flat pack bathrooms are manufactured in our modern production facilities and are
supplied ready for assembly and installation.
Follow this guide and your Add-A-Bathroom bathroom should give you many years of trouble free
service. No leaks, no cracks, no maintenance. If you have any queries please call us on
1300 559 121
.
No specialised tools are required to install an Add-A-Bathroom flat pack bathroom. Installation of a
bathroom usually requires 2 competent people.
All plumbing and electrical work must be performed by appropriately licensed contractors.
Flat pack bathrooms are normally supplied as 8 panels with pre-drilled bolt holes and fasteners. Before
commencing installation open packaging and ensure all items are correct and in acceptable condition. No
claims regarding damage or missing components can be entertained after assembly commences.
(If you have sufficient access to receive and manoeuvre an assembled bathroom, the bathroom can be
supplied fully assembled ready for installation. Please contact Add-A-Bathroom for details.)
Line up, identify and label all panels so as to facilitate assembly. Check quantity of nuts, bolts, washers
etc. Ensure sufficient suitable sealant is available; this may be included with your bathroom depending
upon individual order.
Clean and maintain your new Add-A-Bathroom bathroom with domestic grade non-abrasive cleaning
agents. Walls may be polished with automotive or marine polishes suitable for use on fibreglass. Ensure
polishes, silicone washes, waxes and the like are kept away from any bathroom floor as such products
may be slippery.