ADC PG-FlexPlus AMU-912 Manual Download Page 40

Page: 40 / 130

SCP-AMU912-010-06H

July 19, 2004

ADC Telecommunications, Inc.

Log On the AMU-912

This screen logs the user into the system.

The factory-default password is

password#1

If the password has been changed and the new password is not known, contact ADC Technical Support
while at the terminal. Technical Support will provide a temporary password based on the Access Key
number displayed on the Logon screen.

Log On the AMU-912

Step

Action

Press

several times to activate the Autobaud feature. When the Login screen displays, type

the

Password

, then press

If an invalid Password is entered, the Login screen is redisplayed with the message

Invalid

Password...Try Again:.

Type the

Password

, then press

SPACEBAR

ENTER

Summary of Contents for PG-FlexPlus AMU-912



































































































































Search results

Summary of Contents for PG-FlexPlus AMU-912

Reviews:

Related manuals for PG-FlexPlus AMU-912

Brands by name

Popular brands

ADC PG-FlexPlus AMU-912, Manual

Search results

Summary of Contents for PG-FlexPlus AMU-912

Reviews:

Related manuals for PG-FlexPlus AMU-912

Brands by name

Popular brands