ADC HiGain Wideband 3190, Installation And Verification Manual

Page: 93 / 108

LTPH-SM-1052-04 Appendix C - Optional Wire-Wrapping Port Connections
HMS-358 List 5 and List 6 July 14, 2002 81
Figure 45. Routing Cables Under the Field Access Cover
Step Procedure Installer Check
ü
Wear an antistatic wrist strap and connect it to the ESD strap input.
1 To remove the field access cover ( Figure 44 on page 80 ), loosen the 4-40 PH screw, slide the cover
to the right, and lift it away from the chassis.
H
2 Perform the required wire-wrapping procedures determined by CO management. Figure 45 shows
how the cable will be routed under the cover and to the field access area.
H
3 Replace the field access cover by aligning the cover with the notch and sliding it into place.
H
4 Secure the field access cover with the 4-40 PH screw.
H
Installer Signature
?
Date
Wirewrapped cable
Field access
cover