ADC ES35/35, Installation & Operator'S Manual, Page: 14 / 24

14 American Dryer Corp. WFR 112807 - 15
Gas Specifications for Dryers Going to Rest of the World ***
Gas Type and
Nominal Heating Value
Supply
Pressure
** Gross Heat Input
per Pocket/Tumbler
Orifice Size
** Orifice
(Injector)
Qty. per
Pocket/
Tumbler
Burner
Pressure
B tu /f t 3 in WC Btu/hr kW DMS mm in WC
Natural 1,000 7.0-13.0 64,000 18.74 23 3.912 1 3.5
* Propane 2,500 11.0 64,000
18.74
42
2.375
1 10.5
Gas Specifications for Dryers Going to CE Countries **
Gas
Type
Nominal
Heating Value
Supply
Pressure ***
Gross Heat Input
Per Pocket/Tumbler
Fuel
Consumption
Per Pocket/
Tumbler
Orifice Size
Orifice
(Injector)
Quantity
Burner
Pressure
B tu / ft
3
mb Btu/hr kW DMS mm mb
Natural (I
2H
/I
2E
) 1,000
15-30
55,000
16.12 1.556 M
3
/H
22
3.988
1
6.9
Natural (I
2L
) 830 20-35 55,000 16.12 1.874 M
3
/H 22 3.988 1 9.5
Natural (I
2ELL
) 830
15-30
55,000
16.12 1.874 M
3
/H
22
3.988
1
9.5
* Natural ( I
2E+
)
1,000 20 55,000 16.12 1.556 M
3
/H 31 3.048 1 —
830 25 55,000 16.12 1.874 M
3
/H 31 3.048 1 —
* Butane (I
3+
) 3,175 28-30 55,000 16.12 1.161 kg/H 48 1.93 1 —
* Propane (I
3+
) 2,500 37 55,000 16.12 1.161 kg/H 48 1.93 1 —
Butane (I
3B/P
) 3,175 28-30/50 55,000 16.12 1.161 kg/H 44 2.184 1 18.1
Propane (I
3P
) 2,500 28-30/50 55,000 16.12 1.161 kg/H 44 2.184 1 24.9
Heat Input / Gas Consumption / Orifice (Injector) Data
Shaded areas are stated in metric equivalents
* Gas valve’s internal regulator disabled.
** Information is per pocket/tumbler.
*** Consult factory for elevations over 2,000 feet (610 meters) for correct orifice size.
!
WARNING
(CE Dryers Only)
This appliance must only be operated with the gas
type indicated on the dryer’s data plate. If the
appliance is converted (gas type changed), a data
plate amendment must be obtained from American
Dryer Corporation for CE approved units.
Shaded areas are stated in metric equivalents
* Gas valve’s internal regulator disabled.
** Consult factory for elevations over 2,000 feet (610 meters) for correct orifice size.
*** Nominal supply pressure.
For Australia, refer to data plate.
Shaded areas are stated in metric equivalents
* Consult factory for elevations over 2,000 feet (610 meters) for correct orifice size.
Gas Connections
Inlet connection ..... 1/2” N.P.T.
3/8” B.S.P.T. (CE and Australian dryers)
Inlet supply size .... 1/2” Diameter Pipe (minimum)
Gas Specifications for Dryers Going to Australia *
Gas
Type
Supply
Pressure
Gross Heat Input
Per Pocket/
Tumbler
Orifice Size
Orifice
(Injector)
Quantity
Burner
Pressure
kPa MJ /h DMS mm kPa
Natural
1.7-3.2 58.03
22
3.988
1
0.69
Propane 2.75 58.03 44 2.184 1 2.49