background image

Page 3-3

ADCP-80-353 • Issue 2 • August 2002 • Section 3: General Information

7

CUSTOMER INFORMATION AND ASSISTANCE

©

 2002, ADC Telecommunications, Inc.

All

 Rights Reserved

Printed

 in U.S.A .

13944-J

WRITE:

ADC TELECOMMUNICATIONS,  INC
PO BOX 1101,
MINNEAPOLIS, MN 55440-1101, USA

ADC TELECOMMUNICATIONS (S'PORE) PTE. LTD.
100 BEACH ROAD, #18-01, SHAW TOWERS.
SINGAPORE 189702.

ADC EUROPEAN CUSTOMER SERVICE, INC
BELGICASTRAAT 2,
1930 ZAVENTEM, BELGIUM

PHONE:

EUROPE

Sales Administration: +32-2-712-65 00
Technical Assistance: +32-2-712-65 42

EUROPEAN TOLL FREE NUMBERS

UK:

0800 960236

Spain:

900 983291

France:

0800 914032

Germany: 0180 2232923

U.S.A. OR CANADA

Sales: 1-800-366-3891 Extension 73000
Technical Assistance: 1-800-366-3891 Extension 73475

ASIA/PACIFIC

Sales Administration: +65-6294-9948
Technical Assistance: +65-6393-0739

ELSEWHERE

Sales Administration: +1-952-938-8080
Technical Assistance: +1-952-917-3475

PRODUCT INFORMATION AND TECHNICAL ASSISTANCE:

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice.
In no event shall ADC be liable for  any damages resulting from loss of data, loss of use, or loss of profits and ADC further
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of
liability applies to all products, publications and services during and after the warranty period. This publication may be
verified at any time by contacting ADC's Technical Assistance Center. 

[email protected]

[email protected]

[email protected]

Summary of Contents for DSX-4U-24



































Reviews: