4. COMPONENTS OF YOUR BLOOD PRESSURE MONITOR
The illustration shows your blood pressure monitor, consisting of: Wrist monitor with attached cuff, storage
case, and instruction booklet.
For wrist circumference: 5.3−7.7” (13.5−19.5 cm)
5. SETTING UP YOUR BLOOD PRESSURE MONITOR
5.1. Inserting the batteries
After you have unpacked your device, insert the batteries. The battery compartment is located on the bottom
of the device.
Push and lift to remove the battery cover.
1.
Insert the batteries (2 x AAA, 1.5V), observing the indicated polarity.
2.
Attention!
If a battery warning appears in the display, the batteries are almost discharged and
•
must be replaced.
After battery warning appears, the device will not work until the batteries have been
•
replaced.
If the blood pressure monitor is not used for long periods, remove the batteries from the
•
device.
Use “AAA” Long-Life or Alkaline 1.5V batteries. Do not use rechargeable batteries.
•
Functional check: Press the «
MEMORY
» button down to test all the display elements.
•
When functioning correctly many icons will appear.
5.2. Setting the Time and Date
This blood-pressure monitor incorporates an integrated clock with date display. After new
batteries have been inserted, the device will request the date and time to be reset.
After new batteries have been inserted, you will have to set the year. The 4 characters
1.
(2014) on the screen will flash. You can advance the year by pressing the «
MEMORY
»
button. To confirm and set the year, press the «
TIME
» button.
To set the month, use the «
MEMORY
» button. To confirm and set the month, press the
2.
«
TIME
» button.
To set the day, use the «
MEMORY
» button. Press the «
TIME
» button to confirm. To set
3.
the hour, use the «
MEMORY
» button. Press the «
TIME
» button to confirm. To set the
minutes, use the «
MEMORY
» button. Press the «
TIME
» button to confirm.
Memory
Button
Time/Date
Button
