Provisioning
150-357-200-02, Issue 2
36
February 9, 1999
HXU-357 List 1
b
Set the state to UNEQUIPPED by typing
(if the line is not being
used).
11
Type
+
to return to the Configuration Management screen.
12
Type
to select Service Mode.
13
Type
to select DS1 service mode.
14
Type the number of an individual channel line or select all channels by
typing
.
15
Do one of the following:
a
Type
to select (I)N SERVICE.
b
Type
to select (O)UT OF SERVICE.
Placing the HXU DS3 Interface in Service
1
Log onto the maintenance terminal connected to the HMU craft port.
2
Type
at the prompt (<), and then press
.
3
Type the password, and then press
. The default password is
public
.
4
From the Network Status screen, type the number of the desired shelf ID
(1 through 32), and then press
.
5
From the Shelf Status menu, select
to log onto the multiplexer.
6
At the multiplexer logon prompt (ID:), type a valid password to display
the Root menu. The default password is
public
.
7
Type
to select Configuration Management.
8
Type
to select Service Mode.
9
Type
to select DS3 service mode.
10
Do one of the following:
a
Type
to set to IN-SERVICE.
b
Type
to set to OUT-OF-SERVICE.
2
CTRL
P
2
2
0
1
2
TAO
ENTER
ENTER
ENTER
M
1
6
1
1
2
