DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 45
Issue 1.2
13.4.4
STARTING A CROSSFADE
To crossfade from the
current
step to the
next
step, press;
[ >]
(forward).
The crossfade will occur with the
incoming
step fading in, in its IN time and the
outgoing
step
fading out in its OUT time. The display momentarily shows the step number of the incoming
step.
To momentarily see the step number again, hold down [
stop/step
] (cue list master).
To continuously see the step number on the display press [
select
], [
cue list flash
]. To turn
off the display press [
select
].
While the crossfade is
in progress
, the
>
(forward) button flashes for the duration of the IN
fade and the
<
(reverse) button flashes for the duration of the OUT fade.
Each press of the
[ >]
(forward) button will start the crossfade to the next step.
Note
: You do not have to wait for a step to complete before starting the next step.
13.4.5
CROSSFADING TO THE PREVIOUS STEP
To crossfade from the
current
step to the
previous
step, press;
[<]
(reverse).
You may only
crossfade
back one step. You may however
STEP
back to any step. See
“STEPPING A CUE LIST” below
13.4.6
STOPPING A CROSSFADE
To stop a crossfade
in progress
press; [
step/stop
].
When a crossfade has been stopped, the
>
(forward) button,
<
(reverse) button and step/stop
buttons all flash.
13.4.7
STARTING A STOPPED CROSSFADE
To start a stopped crossfade in the
forward
direction, press;
[>]
(forward).
To start a stopped crossfade in the
reverse
direction, press;
[<]
(reverse).
To
momentarily
run a stopped crossfade in the current direction;
HOLD
[
step/stop
].
The crossfade only progresses whilst [
stop/step
] is held down.
13.4.8
REVERSING A CROSSFADE
To reverse a crossfade
in progress
and return to the previous step, press;
[<]
(reverse).
13.4.9
STEPPING A CUE LIST
If a cue list is stationary (idle between steps), you may step (instant change, no times
executed) through the cue list in either direction.
To instantly step a cue list in the forward direction;
HOLD
[
step/stop
], tap
[>]
(forward).
To instantly step a cue list in the reverse direction;
HOLD
[
step/stop
] ,tap
[<]
(reverse).
13.4.10
RANDOM STEP SELECTION
To randomly jump to any step in a cue list;
HOLD
[
stop/step
] and rotate the
EDIT
Wheel.
The display shows the selected step number. A + or – sign indicates that the selected step is
higher or lower than the current step. The current step has no sign.
When the [
stop/step
] button is
released
, the cue list
jumps
to the selected step.
