manualshive.com logo in svg

ADB DOMINO 24, User Manual

Share
Download
ADB DOMINO 24 User Manual Download Page 11

DOMINO 24 & 48 USER MANUAL 

 

 

 

 

 

www.adblighting.com

 

User Manual - page 9 
Issue 1.2 
 

•

  Up to 25 playbacks/chasers on DOMINO 48 can be played simultaneously - 13 on 

DOMINO 24.Up to 25 playbacks and chasers on DOMINO 48 can be played 
simultaneously – 13 on the DOMINO 24. 

•

  Fully proportional softpatch to 512 dimmers. 

•

  2-preset, extended & memory modes, each fader with flash button. 

•

  LED display showing status information via scrolling messages. 

•

  Up to 250 steps of a chaser can be recorded as channels, or Memories/Snapshots. 

•

  On DOMINO 24 U & 48 U as standard, and on DOMINO 24 & 48 as retrofit option: 

- 1 SVGA output for displaying memories, patch, texts and help menus in multiple 

languages 

- 1 USB connector for show recording 
- MIDI IN/OUT connector. 

•

  1 DMX512/1990 output on XLR-5F connector. 

•

  90-260 V, 47/63Hz power supply with automatic detection. 

•

 CE 

approved. 

1.6.2

 

OPTIONS 

A number of useful options are available from ADB to compliment the DOMINO lighting desk. 
 

•

  USB option (USB/DOM) for retrofitting on DOMINO 24 & 48 and providing: 

o

  1 SVGA output for displaying memories, patch, texts and help menus in 

multiple languages  

o

  1 USB connector for show recording  

o

  MIDI IN/OUT connector.  

•

  USB memory Stick (FLASHMEM) 

•

  XLR3 "gooseneck" desk lamp (WORKLITE/XL3)  

•

  Dust Cover DOMINO 24 (DC/DOM24) 

•

  Dust Cover DOMINO 48 (DC/DOM48) 

•

  Flight Case DOMINO 24 (FLY/DOM24) 

•

  Flight Case DOMINO 48 (FLY/DOM48) 

1.6.3

 

CHARACTERISTICS 

Power requirements: 90-260 V, 47-63 Hz power supply with automatic detection. 
 
Dimensions: 

•

 DOMINO 

24 

o

  (Width x Depth x Height): 464 x 367 x 115 mm 

o

  Net weight: 7.5 kg 

•

 DOMINO 

48 

o

  (Width x Depth x Height): 684 x 367 x 115 mm 

o

  Net weight: 10.5 kg 

1.7  CARING FOR YOUR DOMINO 

The DOMINO is manufactured from quality components and will give many years of service if 
you take some basic precautions. 
 

•

  Do not allow any liquids or foreign objects to enter the DOMINO.  

•

  The inside should be cleaned and dried as soon as possible. Only suitably qualified 

personnel should remove the covers and perform any such maintenance. 

Summary of Contents for DOMINO 24





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands