END OF LIFE DISPOSAL
INFORMATION FOR USERS as per Directive 2012/19/EU and Directive 94/62/EC about waste
electrical and electronic equipment, and packaging and packaging waste.
Manufactured by ADB SA
Avenue de Tournay 7 – 1292 Chambésy - Switzerland
For further information http://adbglobal.com
The HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trade marks of HDMI Licensing LLC in the United States
and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
registered trademarks of Dolby Laboratories.
This item incorporates copy protection technology that is protected by U.S. patents
and other intellectual property rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited
®
FCC INFORMATION
Please use the supplied Power Adapter to ensure FCC compliance.
Please use a good quality shielded video signal cable.
Use of other adapters may cause interference with radio and television reception.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interfer-
ence that may cause undesired operation.
This equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and
used properly — that is, in strict accordance with the instructions — it may cause interference with
radio and television reception.
This equipment has been tested and found to comply with the limits for a Class B digital device
in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to
provide reasonable protection against such interference in a residential installation. However, there
is no guarantee that interference will not occur in a particular installation.
You can determine whether this equipment is causing interference by turning it off. If the interfer-
ence stops, it was probably caused by this equipment or one of the peripheral devices.
If this equipment does cause harmful interference to radio or television reception, the user is en-
couraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. In that event, user’s right to use the equipment
may be limited by FCC regulations, and he may be required to correct any interference to radio or
television communications at his own expense.
The user may find the following booklet, prepared by the Federal Communications Commission,
helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available
from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
Wireless Radio Use
The band 5250-5730 MHz will be disabled by the software during the manufacturing and cannot
be changed by the end user. This device meets all the other requirements specified in Part 15E,
Section 15.407 of the FCC Rules.
Exposure to Radio Frequency Energy
The radiated output power of this equipment is below the FCC radio frequency exposure limits
for uncontrolled equipment. This device should be operated with a minimum distance of 20 cm
between the device and a person’s body and must not be co-located or operated with any other
antenna or transmitter subject to the conditions of the FCC Grant.
The crossed-out wheeled bin symbol on the Product or on its packaging indicates that
this Product must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over to a desig-
nated collection point for the recycling of waste electrical and electronic equipment, or
to return it to the dealer when purchasing a new appliance
The separate collection and recycling of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment and supports the reuse and/or recycling of materials the equipment is made
of. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office or your household waste disposal service.
The unlawful disposal of the product by the user may entail a fine.
Safety Regulations
The product is UL-listed and is in compliance with:
US Safety Regulation according to UL 60950-1
Canadian Safety Regulations according to CAN/CSA
-C22.2 No. 60950-1
Waste packaging should be separated and delivered at the collection points in accordance
with the local waste collection rules.
DO NOT DISPOSE OF AS HOUSEHOLD UNSORTED WASTE
