KLEMANTIS AS1000 - AS500
19
7. APPENDIX
7.1
Klemantis installation steps
The following steps summarize the recommended procedure for installing a single row of units (for instance on the floor):
1. Calculate the proper installation distance (D) from the cyclorama.
2. Place the Klemantis stably and make sure all Klemantis units are parallel to the cyclorama, at the set distance (D). Reduce the gap between two
adjacent fixtures to a minimum (1 - 2 mm).
3. If the floor is not level, use the adjustable feet
(fig. 18)
4. Adjust the tilt of each unit (a digital bubble level smartphone app may be used):
a. Before tightening the clamps, set all the Klemantis units to 0° in the back-stage-to-front-stage direction
(fig. 19)
.
18
19
Summary of Contents for AL2001
Page 22: ...KLEMANTIS AS1000 AS500 22 ...
Page 23: ...KLEMANTIS AS1000 AS500 23 ...
