ADB Safegate SafeLED IQ SL-RGL-E User Manual Download

Page: 41 / 46

8.3 SafeLED IQ Elevated Light Version 1, trafo converter

Note

Contact ADB SAFEGATE for assistance with ordering spare parts.

Description

Quantity per

Order Code

fitting

code

Housing.

15531 /

SGE.SP15531

1, 2a, 3, 7

Housing with converter

unit 6.6A/2A 50Hz V2

upgrade, LED-board (V2

only), LED-cable, cable

(style 1/L-823 connector),

cable gland and protection

tube.

19186 /

SGE.SP19186

1, 2b, 3, 7

Housing with converter

unit 6.6A/2A 60Hz V2

upgrade, LED-board (V2

only), LED-cable, cable

(style 1/L-823 connector),

cable gland and protection

tube.

19214 /

SGE.SP19214

Front glass

15535 /

SGE.SP15535

Gasket kit (1x463mm,

2x204mm and 4 bonded

seals)

15536 /

SGE.SP15536

Front plate with visors

15537 /

SGE.SP15537

Cable (style 1/L-823

connector) with cable

gland and protection tube.

15538 /

SGE.SP15538

FAA stand including

fasteners

15540 /

SGE.SP15540

IEC stand including

fasteners

15539 /

SGE.SP15539

Notes

All screws for fastening are included.

Note

Component availability or design may be subject to change due to unforeseen circumstances. This document is

subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for

error or price changes.
For more information, contact ADB SAFEGATE or see

www.adbsafegate.com

UM-0102, Rev. 2.5, 2019/05/07

Summary of Contents for SafeLED IQ SL-RGL-E








































Search results

Summary of Contents for SafeLED IQ SL-RGL-E

Reviews:

Related manuals for SafeLED IQ SL-RGL-E

Brands by name

Popular brands

ADB Safegate SafeLED IQ SL-RGL-E, User Manual

Search results

Summary of Contents for SafeLED IQ SL-RGL-E

Reviews:

Related manuals for SafeLED IQ SL-RGL-E

Brands by name

Popular brands