ADB Safegate RELIANCE Intelligent Lighting Platform II, User Manual

Page: 13 / 42

Features
•
No separate communication cable required. RF signal on high voltage power cable for lighting control.
•
Most cost-effective and proven solution for existing ground lighting systems.
•
User friendly integrated web server allows easy operation and system status recognition.
•
Up to 11 different frequency bands can be used in parallel, and up to 32 different timeslots which allow an increase in the
number of independent communication channels up to 176.
•
Fast and predictable switching times through the use of reliable communication methods and limited repeater levels.
•
Synchronizing of control systems in different vaults by Ethernet in compliance with IEEE 1588.
•
Single Frequency Network system includes an automatic network configuration function. This functionality provides for
dynamic communication adaptation in all environmental conditions (such as humidity variation). The system dynamically
checks repeater settings and automatically sets them, even if a Remote in the communication path has failed.
•
Less crosstalk due to symmetrical design of coupling components (transmit and receive path), independent
communication channels and lower transmission power compared to similar systems in the market.
•
Can be used as a stand-alone monitoring system or integrated with an Airfield Lighting Control System (ALCS).
•
Individual control of different functions in one lamp circuit. For example, a combination of Stop Bar and Lead-In Circuit.
•
Optional Runway Guard Light Remotes, automatic start and net-synchronous Wig-Wag operation, independent from
Master meeting FAA requirements.
•
Firmware and application software can be downloaded into either the Master (substation) or Remotes (field units).
•
State-of-the-art diagnostic tools provide a quick overview about communication behavior. Network management system
provides detailed routing statistics to ensure reliable communication quality.
•
Communication measurements can be taken in advance within one day to analyze existing airfield infrastructure.
•
Field sensors can be integrated via Utility Remotes into the RELIANCE Intelligent Lighting lamp control and monitoring
circuit for detection and transmission of local surveillance information via power line communication.
•
Able to work with any kind of CCR and designed for 40 Ampere peak current.
Main Characteristics and Figures
•
Up to 300 Remotes per circuit, providing a potential of 600 individually addressable lights per circuit.
•
Up to 20 km roundtrip circuit length.
•
Configurable block evaluation modes include full feedback, small sample feedback, and optimistic feedback.
•
Can command 10 blocks to 10 distinct states with one power-line message. Can command all blocks to one state with one
powerline message.
•
Switches up to 120 lights in 10 different groups in less than 1 second.
•
Switches 5 stopbar/lead-on lights simultaneously and presents real-back indication in less than 1 second.
•
Status poll provides detailed Remote and lamp parameters.
96A0480, Rev. B, 2019/12/06 7
Copyright
©
ADB Safegate, All Rights Reserved