ADB Safegate ACE2 User Manual Download Page 43

Page: 43 / 46

Appendix A: SUPPORT

Our experienced engineers are available for support and service at all times, 24 hour/7 days a week. They are part of a

dynamic organization making sure the entire ADB SAFEGATE is committed to minimal disturbance for airport operations.

Table 11: ADB SAFEGATE Support

Live Technical Support - Americas

If at any time you have a question or concern about your product, just contact ADB SAFEGATE’s

technical service department. Trained in all areas of system issues, troubleshooting, quality control

and technical assistance, our highly experienced Technical support specialists are available 24 hours

a day, seven days a week to provide assistance over the phone.

ADB SAFEGATE Americas Technical Service & Support (US & Canada): +1-800-545-4157

ADB SAFEGATE Americas Technical Service & Support (International): +1-614-861-1304

During regular business hours, you can also Chat with a Service Technician. We look forward to

working with you!

Before You Call

When you have an airfield lighting or system control system problem it is our goal to support

airfield maintenance staff as quickly as possible. To support this effort we ask that you have the

following information ready before calling.

•

The airport code

•

If not with an airport, then company name (prefer customer id number)

•

Contact phone number and email address

•

Product with part number preferable or product number

•

Have you reviewed the product’s manual and troubleshooting guide

•

Do you have a True RMS meter available (and any other necessary tools)

•

Be located with the product ready to troubleshoot

Note

For more information, see

www.adbsafegate.com

, or contact ADB SAFEGATE Support via email at

[email protected] or
Brussels: +32 2 722 17 11
Rest of Europe: +46 (0) 40 699 17 40
Americas: +1 614 861 1304. Press 3 for technical service or press 4 for sales support.
China: +86 (10) 8476 0106

A.1 ADB SAFEGATE website

The ADB SAFEGATE website,

www.adbsafegate.com

, offers information regarding our airport solutions, products, company,

news, links, downloads, references, contacts and more.

96A0357, Rev. G, 2019/11/08

Summary of Contents for ACE2








































Search results

Summary of Contents for ACE2

Reviews:

Related manuals for ACE2

Brands by name

Popular brands

ADB Safegate ACE2, User Manual

Search results

Summary of Contents for ACE2

Reviews:

Related manuals for ACE2

Brands by name

Popular brands