ADB Safegate ACE2, User Manual

Page: 27 / 46

There are four knockouts in both the top and bottom of the enclosure walls for one inch EMT metal conduit fittings for
wires and fiber optic cables, see Figure 12 Wall-Mount Bottom View and Figure 13 Wall-Mount Top View for dimensions.
and the Conduit Drawing, Figure 14 , for routing. Power and ACE-to-ACE communication wiring must be in separate
conduits.Attach all conduits as required to the bottom or to the top access plate ONLY as seen in Figure 14 .Protect ALL
electronic equipment in the ACE2 enclosure while installing conduit.
Figure 11: Wall-Mount, Bottom View
Figure 12: Wall-Mount, Top View
96A0357, Rev. G, 2019/11/08 21
Copyright
©
ADB Safegate, All Rights Reserved