38
GB
1) Installation:
• ON/ OFF switch (7) in OFF position.
• Loosen the screw on the SIM cover (8)
• Push the SIM-card holder (10) to the open position. Then place the
SIM-card with the bevelled corner corresponding to the slot and the
gold coloured chip downwards.
• Slide the holder back into the closed position.
• Screw the SIM cover back into place (8).
• Plug the temperature sensor (9) into its port (2).
This must be connected for temperature controlled commands to
function.
• Set the ON/OFF switch (7) to the ON position.
• Plug ADAX SET into a power outlet.
Description of ADAX SET:
1. Data port (for service personnel only)
2. Temperature sensor port
3.
M
button (see point 3, page 39)
4. Power output (max 16A)
5. Signal lamps (see point 8, page 45)
6. Power in
7. ON/OFF switch
8. SIM cover
9. Temperature sensor
10. SIM-card holder
