TouchEntry
®
-XT
3
Only Flush-mounted:
For flush mounting, a wall cut-out
with the following dimensions must
be made:
288mm (h) x 136mm (w) x 36mm (d)
4 Use the flush housing to mark the
drill holes.
Make sure that the flush-mounted
housing is oriented correctly. When
correctly mounted, the opening for
the cables is located in the lower
half.
Pull the Ethernet cable through the
cut-out on the back of the terminal.
Use the screws, seals and dowels
from the mounting kit to fix the
flush-mounted housing to the wall.
Installation
6
