User Manual
V090513
- 11 -
RAID Mode DIP Switch Setting:
1. Normal Mode (Set DIP SW-1: OFF, SW-2: OFF)
Normal Mode is without specific RAID Functions. The system
recognizes two separate SSDs/HDDs of their own capacity when
host supports port-multi. Example: you install 100GB and 80GB
Hard Drives, and will see two separate capacities of 100GB & 80GB.
If port-multi is not supported, it can recognize one HDD only.
2. RAID 1 Mode (Set DIP SW-1: OFF, SW-2: ON)
RAID 1 Mode is the RAID Mode with high safety (Mirror backup).
Selecting RAID 1 system will help you perfectly protect your data by
building the same data in your both hard drives. However, it is the
smallest capacity within RAID Modes.
For example, you install 100GB and 80GB Hard Drives, and the
capacity will be one 80GB (depended on the smaller hard drive
capacity) totally.
3. JBOD Mode (Set DIP SW-1: ON, SW-2: OFF)
JBOD Mode will combine all of the hard drives into a single hard
