User Manual
V090513
- 10 -
Step 4: Ready to change the RAID Mode
Pull off the Power Cable and change the Dip Switch to the RAID Mode
you want.
Step 5: Activate the RAID Mode
Press
CHANGE MODE
button for 5 seconds and Plug on the Power
Cable to activate the RAID setting at the same time.
Note:
A) If present mode is in Normal Mode, users don’t need to reset.
B) Users should wait at least 5 seconds to activate the RAID Mode
and then release the Change Mode button
C) After the selected RAID is built ready, then, to partition/format
the RAID-built SSDs/HDDs. After SSDs/HDDs being formatted,
they are ready to be used.
