Adata XPG LEVANTE 360, Quick Start Manual, Page: 7 / 12

12 11
For frequently asked questions, additional information and service instruction
please visit the product page at www.xpg.com
EN
CLEANING INSTRUCTIONS
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its integrity.
DURATION OF WARRANTY
ONLINE CUSTOMER SERVICE
ADATA Technology Co., Ltd. provides a 5 year warranty period for this product unless
regional laws and regulations state otherwise.
This limited warranty covers only repairs or replacements of products manufactured by
ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for the following
reasons:
The warranty label is altered, damaged or missing.
Product serial number does not conform to our original system.
Products purchased from an unauthorized agent.
Damage caused by natural calamity
Any abuse outside the intended product operation.
LIMITATION OF WARRANTY
1.
2.
3.
4.
5.
SAFETY INSTRUCTIONS
1.
2.
3.
4.
Keep the device away from liquids, excess humidity or moisture to avoid any shock
hazards. Should the device come into contact with liquids, please make sure to unplug the
device immediately, store it in a dry place, and contact support for assistance.
Operate the device only within the specific temperature range of 0°C (32°F) to 40°C
(104°F). Should the temperature exceed this range, unplug and/or switch off the device in
order to let the temperature stabilize to an optimal level.
Should you have any other trouble operating the device properly and normal
troubleshooting does not work, please unplug the device and contact our service for
support.
Do not attempt to service or fix the device by yourself at any time.
For a proper use of the product, and to ensure your safety,please follow the following
instructions:
An external
LED LIGHTING CONTROLLER
is provided to switch lighting effects
(up to 13 pre-set Modes, 5 different levels of Speed and 5 different levels of Brightness).
Connect to Pump’s 3-Pin or to the
provided
ARGB LED CABLE
Connect to PSU’s SATA Connector
LED LIGHTING CONTROLLER
Function
Click 1 Click 2 Click 3 Click 4 Click 5 Click 6 Click 7 Click 8 Click 13 Click 9-12
Change lighting mode Red Green Blue Purple Yellow White Orange
Lighting effect
No. 1-4
Neon
Green
Off
Change lighting effect speed
Change lighting effect
brightness
MODE
Button
SPEED
Button
LIGHT
Button
20%, 40%, 60%,
80%, 100%
20%, 40%, 60%, 80%, 100%