background image

 

UM30, UM60, UM90 User Manual 

Troubleshooting 

 

No power LED on control panel 

Ensure IEC lead, mains switch and inlet fuse  
If 24Vdc power input is being used, check battery is charged 

Power LED is on but no other LEDs 
and no output 

Check input signals and condition of input connection leads 
Check MASTER, MIC, LINE IN or MEDIA controls are turned up 

Power light and output LEDs lighting 
but no output 

Check speaker output terminals are connected correctly 
Check speakers are working (test on another amp if available) 

Bluetooth cannot connect 

Ensure that the sending device is within Bluetooth range (5-10m) 
Check that the connected device is the correct ID 

No audio from connected Bluetooth 
device 

Ensure that volume controls are not turned down on sending device 
Check volume and Play/Pause buttons in case Bluetooth is muted 

USB player will not play audio from 
media      

Press PLAY on transport controls 
Check memory device is connected properly (remove and re-insert) 
Check file types 

 standard compressed digital audio files required 

Check memory device works on a PC or Mac for standard playback 

Output is very loud or distorted 

Check level of input signal is not too high 
Reduce MIC, LINE IN, MEDIA and/or MASTER level 
Ensure Hi-Z line level input(s) not connected via MIC input 

Output is working but at very low 
level 

Check input audio source level is not too low 
Increase MIC, LINE IN, MEDIA and/or MASTER level 
Check for quiet recording of media files on USB  

Feedback from microphone 

Face microphone away from speakers and monitors 
Turn down MIC and/or MASTER level 

Amplifier overheating or cutting out 

Check that 

8Ω speakers are not connected to 100V terminals

 

Ensure total 100V speaker wattage is lower than amplifier rating 
Ensure that 100V 

and 8Ω speakers are not both connected

 

 

 

 
 

 
 
 

 

 

 

Disposal:

 

The “Crossed Wheelie Bin” symbol on the product means

 that the product is classed as Electrical or 

Electronic equipment and should not be disposed with other household or commercial waste 

at the end of its useful life. The goods must be disposed of according to your local council guidelines. 

Hereby, AVSL Group Ltd. declares that the radio equipment type 953.173UK, 953.176UK and 953.179UK are in 

compliance with 

Directive 2014/53/EU

 

 

The full text of the EU declaration of conformity for 953.173UK is available at the following internet address: 

http://www.avsl.com/assets/exportdoc/9/5/953173UK%20CE.pdf

 

 

The full text of the EU declaration of conformity for 953.176UK is available at the following internet address: 

http://www.avsl.com/assets/exportdoc/9/5/953176UK%20CE.pdf

 

 

The full text of the EU declaration of conformity for 953.179UK is available at the following internet address: 

http://www.avsl.com/assets/exportdoc/9/5/953179UK%20CE.pdf

 

 

Errors and omissions excepted. Copyright© 2021.  

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ 

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland

 

 

Summary of Contents for UM Series









Reviews: