UM30, UM60, UM90 User Manual
Rack mounting
The UM series amplifiers can be mounted into a 19
”
rack cabinet using the supplied rack accessories.
As shown below, the 2 joining brackets link a pair of UM series amplifiers together to form a full-width 1U
rack-mount pair. One rack ear can be mounted at each end for fixing to the rack strip.
Wall or under counter mounting
The rack mounting accessories can also be attached so that
the amplifier can be mounted against a wall or under a
counter or work surface. To do this, mount the rack ears
with the tabs aligned with the top of the housing to provide
mounting holes to screw the amplifier to the underside of a
work surface or against a wall with the controls visible
vertically.
Front panel
Rear panel
1. 3.5mm stereo AUX input
7.
USB port
2. Media player display
8.
Media player controls
3. MIC volume control
9.
Microphone input jack
4. LINE IN volume control
10. VU meter
5. MEDIA volume control
11. FOG/SIREN/ALERT buttons (UM60 & UM90 only)
6. MASTER volume control
12. IEC power inlet and fuse holder
13. Power on/off switch
14. Speaker output terminals
15. DC power terminals
16. LINE OUT connectors (RCA)
17. LINE IN connectors (RCA)
18. Antenna F connector
19. 24V MUTE terminals
