952.984UK User Manual
Up to 20 preset FM stations can be stored for quick access.
Press the PRESET button (11) and navigate to a preset via the +/-
buttons or TUNING dial (12, 13, 14)
Press and hold the TUNING dial to save the current station to the
selected preset.
To access a stored preset, navigate to a preset number and briefly
press the TUNING dial.
Bluetooth Mode
For playback from a smart phone or tablet computer, the AS-4 has an inbuilt Bluetooth receiver.
Press the SOURCE button to reach Bluetooth mode. The top row of the display will show
“
Bluetooth
”
The bottom row of the display will flash
“
Connecting
”
and then after initializing, it will flash
“
Pairing
”
Open the Bluetooth menu on the sending device and search for a Bluetooth ID
“
adastra AS-4
”
Select to pair with this device and if successful, the AS-4 display will stop flashing and show
“
Connected
”
If a previously paired sending device is in range, the AS-4 will connect automatically.
Once connected, audio playback from the sending device will be fed to the AS-4 outputs.
If the sending device goes out of range, the AS-4 will enter pairing mode again.
Note: if there is no playback after 15 minutes, the AS-4 will automatically switch to standby mode.
USB Mode
For playback of mp3 tracks from a USB memory device (up to 32GB), connect the device to the USB port (3)
If there is no USB device or the device is not recognized, the display will show
“
No USB
”
Playback of tracks will normally begin automatically.
The display will show
“
USB
”
in the top row and the track number and elapsed time in the bottom row.
Use the +/- buttons or TUNING dial (12, 13, 14) to navigate tracks.
Press the TUNING dial (14) to pause or play the current track.
Press and hold the TUNING dial to stop playback.
Press and hold the +/- buttons to fast forward or reverse seek through
a track.
Press the PRESET button (11) to set the repeat mode. Repeat
“
One
”
single track or repeat
“
ALL
”
tracks.
AUX Mode
For playback from external devices, such as mp3 players, the AS-4 has a 3.5mm stereo AUX input.
Press the SOURCE button and use the +/- buttons or the TUNING dial to navigate to
“
Auxilliary Input
”
mode.
Any line input connected to the AUX connector will be fed to the AS-4 RCA outputs.
Output level will still be governed by the VOLUME dial.
After Pairing