952.984UK User Manual
Front panel
Rear panel
Connection
Ensure the power is switched off and connect the supplied fig.8 mains lead into the power inlet (20) with the
plug top into a suitable mains power outlet.
Connect the output from the AS-4 to a mixer or amplifier line input using the RCA output connectors (18)
Connect the supplied antenna lead (or suitable external aerial) to the DAB/FM Antenna connector (17)
For Bluetooth reception, a Bluetooth antenna is provided, which should be connected to the SMA connector on
the rear panel (16)
Operation
Switch on the POWER (19) and the LCD display (10) will illuminate.
If the STANDBY LED (2) is lit, press the ON/STANDBY button (1) to activate the AS-4.
(in standby mode, the Day, time & date are displayed with the backlight dimmed)
Pressing the SOURCE button (7) repeatedly will cycle through DAB, FM, Bluetooth, USB and Auxiliary modes.
The VOLUME dial (15) governs the output level of any selected source
In any mode, press MENU (8) to enter the System menu (DAB and FM have additional options - see below)
In the System menu, step through options via the TUNING dial (14) or pr/- buttons (12, 13)
Select an option by pressing the TUNING dial to confirm. Navigate sub-menus in the same way.
Edit the settings via the TUNING dial or +/- buttons and pressing the TUNING dial to enter.
Press MENU to back out of settings, sub-menu and main menu pages.
1.
On/standby button
9.
Track info button
2.
Standby indicator
10.
Backlit LCD display
3.
USB port
11.
Preset select
4.
3.5mm Aux input
12.
“
-
”
value decrement button
5.
3.5mm headphones output
13.
“
+
”
value increment button
6.
Remote control sensor
14.
Tuning dial (press to enter menu option)
7.
Source selector
15.
Volume dial
8.
Menu button
16.
Bluetooth antenna connection
19.
Power on/off switch
17.
DAB+/FM radio antenna connection
20.
Fig.8 Mains inlet
18.
Left + Right RCA outputs