manualshive.com logo in svg

Adash 4400 VA4 Pro, User Manual

The Adash 4400 VA4 Pro is a cutting-edge device designed for vibration analysis, providing unparalleled accuracy and performance. Enhance your maintenance program with this advanced tool. To explore the full potential of your Adash 4400 VA4 Pro, access the user manual for free download at manualshive.com.

Share
Download
background image

ADASH Ltd. 

 

Adash 4400 – VA4Pro

 

 

For further technical and contact information visit www.adash.eu, email: [email protected] 

119 

VA4runup - runup projects are exported here 
VA4recorder - records are exported here 
va4ver file - unit version information (for DDS) 
 
These folders are created when the unit needs them, not actually in the first run. 

A4410 Virtual unit with the DDS connection 

Press the Find button in the DDS VA4Pro window for instrument connection and find manually (Find button) 
A4410_VirtualUnit_verXXXX\VA4_DISC virtual unit folder or the A4410_VirtualUnit_verXXXX\Data folder. 

 

Connection of the Virtual unit with the DDS is done the same way as with the A4400 Va4Pro instrument. It is 
possible to copy projects to and from DDS to and from the A4410 Virtual Unit. 
 
If the DDS and the Virtual unit are not installed on the same computer then you do not reach the DDS via 
network. It is possible to copy the VA4_DISC to the flash drive memory which can be connected to the computer 
with DDS. For DDS is important to find the standard VA4_DISC folder structure. It is not necessary to copy all 
VA4_DISC folders, however directory structure has to be kept (that means the Analyzer projects has to be in 
VA4analyser folder, etc.). 
!!! Attention: VA4_DISC which should be read by DDS have to contain va4ver file. Don’t forget to copy this file, 
when you copy the VA4_DISC folder. 

A4410 Virtual unit and A4400 VA4Pro connection 

How to share projects between the real and virtual unit will be described in this chapter. 
Connect the real Va4Pro instrument to the computer with installed Virtual unit (via USB cable). The VA4Pro unit 
will be found as VA4_DISC (removable disc) on your system. It’s possible to copy the data to and from the 
Virtual VA4_DISC folder. 

Copying projects to the VA4Pro instrument 

Copy the A4410_VirtualUnit_verXXXX\Data\VA4analyser\ProjectName project folder (ProjectName is your 
folder name which you want to copy) into the VA4Pro VA4_DISC\VA4analyser folder (VA4_DISC is the real 
removable storage device here, NOT the virtual unit folder !!!). You have to create empty file with the name 
script.dds in VA4Pro VA4_DISC\VA4analyser after project copy (it has the label sense only). RunUp and 
Route projects (VA4runup and VA4route folders) are copied the same way. Next mode projects are not 
available to copy. 
 
Example:  
We’ve got the analyzer project called Power Station in the virtual unit and we want to add it to the real 
instrument. 
1) Connect the instrument with the computer. 
2) VA4_DISC removable storage device appears. Open VA4analyser folder on this device. 
3) Open \A4410_VirtualUnit_verXXXX\Data\Va4analyser folder. Find Power Station folder in this folder. Copy 
folder into the VA4Pro VA4_DISC. 
4) Create the empty file script.dds in VA4Pro VA4_DISC\VA4analyser\Power Station folder. 

Projects and records copy from the VA4Pro instrument 

!!! Attention: Projects has to be exported to the VA4Pro VA4_DISC first (the same as export to the DDS). 
 
Copy the VA4Pro VA4_DISC\VA4analyser\ProjectName (the real removable storage device here, NOT the 
virtual unit folder!!! ) into the A4410_VirtualUnit_verXXXX\Data\VA4analyser folder. In this case there is no 

Summary of Contents for 4400 VA4 Pro





























































































































Reviews:

No comments

Related manuals for 4400 VA4 Pro

Van Walt KISS Quick Start Manual preview
KISS
Brand: Van Walt Pages: 6
zebris PDM Specification And Operating Instructions preview
PDM
Brand: zebris Pages: 42
Bante Instruments PHscan10 User Manual preview
PHscan10
Brand: Bante Instruments Pages: 6
Bartington MS3 Operation Manual preview
MS3
Brand: Bartington Pages: 15
Bartec MAK TIGER 3003 Service Manual preview
MAK TIGER 3003
Brand: Bartec Pages: 216
YOKOGAWA 96001 User Manual preview
96001
Brand: YOKOGAWA Pages: 2
J.P. Instruments EDM-900 Pilot'S Manual Addendum preview
EDM-900
Brand: J.P. Instruments Pages: 9
J.ASSY VISUM Monitor Technical Manual preview
VISUM Monitor
Brand: J.ASSY Pages: 13
Oceanic ATOM Operating Manual preview
ATOM
Brand: Oceanic Pages: 152
Kaiterra Sensedge Mini Troubleshooting Manual preview
Sensedge Mini
Brand: Kaiterra Pages: 8
Kaiterra Sensedge Manual preview
Sensedge
Brand: Kaiterra Pages: 12
Macherey-Nagel NANOCOLOR Advance Operating Instruction preview
NANOCOLOR Advance
Brand: Macherey-Nagel Pages: 45
LumaSense IMPAC IGA 310 Manual preview
IMPAC IGA 310
Brand: LumaSense Pages: 23
ECOTEST STORA-ABG RKS-01 Operating Manual preview
STORA-ABG RKS-01
Brand: ECOTEST Pages: 146
Sper scientific 860031 Instruction Manual preview
860031
Brand: Sper scientific Pages: 56
Dakota Digital VHX systems Installation And Operation Manual preview
VHX systems
Brand: Dakota Digital Pages: 34
Value WT26 Series Manual preview
WT26 Series
Brand: Value Pages: 20
Zareba Intelligizer Fence Monitor User Manual preview
Intelligizer Fence Monitor
Brand: Zareba Pages: 8

Brands by name

Popular brands

Load more brands