background image

ADASH Ltd. 

 

Adash 3600-MPX

 

 
 

ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: [email protected] 

For next technical and contact information visit www.adash.net,  www.adash.cz 

2

 
 

 
Contents 

 
 

Terminal Board of the Adash 3600-MPX Module............................................................... 3

 

Description of Module Terminal Connectors ..................................................................... 3

 

Description of Adash 3600-MPX......................................................................................... 4

 

Description of Module Control........................................................................................... 4

 

Extending the Set with the Adash 3600-MPX Module ....................................................... 6

 

The Set with a Number of Adash 3600-MPX Modules ...................................................... 7

 

Recommended Procedure of Module Connection ............................................................. 8

 

Technical Specification of Adash 3600-MPX ....................................................................12

 

Dimensioned Sketch of Adash 3600-MPX .......................................................................12

 

 

Summary of Contents for 3600-MPX













Reviews: