BetaBrite Director User Manual
24
Basic sign operation: Using the Remote Control’s sound control
Using the Remote Control’s sound control
Normally, whenever you press a Remote Control key, the sign will
beep. This lets you know that an action has been performed. To turn this
feature off (or on again), hold down SHIFT and press RUN.
Setting a sign’s serial address
The serial address is a number that you can assign to a sign. Typically
this feature would be used for a sign that is connected to other signs on a
network. Giving a unique serial address to a sign allows you to send
messages to that particular sign.
See the document Network Configurations, PN 9708-8046, for more
detailed information on networking signs.
Step
When you do this...
You see this...
1
Press
PROGRAM
.
2
Press
BACK
until SET SERIAL ADDRESS appears.
3
Press
ADV
.
PROGRAM MODE
SET SERIAL
ADDRESS
SERIAL ADDRESS =
00
Summary of Contents for BETAbrite Director
Page 6: ...vi...
