Page 11/23
EINAR
Installation
Guide
Adaptive Recognition
America
Adaptive Recognition
Hungary
Adaptive Recognition
Nordic
Adaptive Recognition
Singapore
WWW.ADAPTIVERECOGNITION.COM
4.5.
ASSEMBLE THE WATERPROOF COVER OF THE RJ45
CONNECTOR
The enclosed IP67 shielded RJ45 connector housing must be assembled as shown. Before damaging
the RJ45 insert, the components of the connector housing must be pulled onto the cable in the order
shown! The crimped RJ45 insert is placed in the housing A. The fastener B is pulled onto the housing
A, and then the sealing insert C is pushed all the way between the clamping arms of the housing A on
the cable. The seal is then clamped to the cable with the clamping part D.
Disconnect the connector
The connector can only be disassembled with the cable connected to the device, otherwise the
mounting tab of the RJ45 insert will not be accessible. First loosen D, then pull back on the cable, then
release B so we can pull parts A and C off the cable. The RJ45 insert then remains in the connector
thanks to its own retaining tab and can be removed by pressing it.
Route the cable according to the image to avoid collecting rainwater at the socket.
