Page 4/14
Carmen Box
Installation
Guide
Adaptive Recognition
America
Adaptive Recognition
Hungary
Adaptive Recognition
Nordic
Adaptive Recognition
Singapore
WWW.ADAPTIVERECOGNITION.COM
PWR LED
It lights up and will remain steady while the system is powered on.
HDD LED
The Yellow LED is linked to Solid-state Drive (SSD) activity signal. LED flashes
every time SSD is accessed.
Power button
Allows users to turn the device on or to force the system off (by pressing the
button for more than 10 seconds). The device switches on automatically
when it receives power.
Reset button
Do not use it. If you forget the device’s password, see “Reset to factory
default” section.
Recovery switch
Do not use it. Removes the Carmen Box software from the device.
HDMI
Do not use it. There is not any useful info/image on this port.
OTG - MicroUSB
Do not use it.
USB 2.0 port (black)
You can use it, but the USB3 port is better for storage.
USB 3.1 Gen1 port (blue)
Connect an USB3 capable storage device here.
LAN
RJ-45 connector for 10/100/1000 Base-T Ethernet port.
PoE
RJ-45 connector for 10/100/1000 Base-T Ethernet port with PoE (IEEE
802.3af class 3, max. 15W, non-isolated)
–
connect your camera here.
Power input
12 V DC jack with screw. Firmly insert at least 60W adapter into this
connector. Loose connection may cause system instability and make sure all
components/devices are properly installed before connecting.
Grounding screw
Ground the device using this screw.
