Adaptive Recognition Carmen ANPR BOX Installation And User Manual Download Page 39

Page: 39 / 59

Carmen Box

USER MANUAL

Page 39/59

Adaptive Recognition

America

Adaptive Recognition

Hungary

Adaptive Recognition

Nordic

Adaptive Recognition

Singapore

[email protected]

WWW.ADAPTIVERECOGNITION.COM

AXIS:
rtsp://Camera_IP/axis-media/media.amp
rtsp://Camera_IP:554/axis-media/media.amp?videocodec=h264&camera=1&fps=15&reso-

lution=1920x1080
rtsp://Camera_IP:554/onvif-media/media.amp?profile=profile_1_h264&sessiontimeout=60&stream-

type=unicast
rtsp://Camera_IP:554/onvif-media/media.amp?profile=profile2&sessiontimeout=60&stream-
type=unicast

(tested with AXIS P1447-LE, Firmware version: 9.10.1)

Bosch:
rtsp://Camera_IP:554/rtsp_tunnel?p=0&h26x=4
rtsp://Camera_IP:554/rtsp_tunnel?p=1&inst=2&h26x=4

(tested with NBE-5503-AL, Firmware version: 6.60.0065)

Dahua:
Main stream:
rtsp://Camera_IP:554/cam/realmonitor?channel=1&subtype=0&unicast=true

rtsp://Camera_IP:554/live
Sub streams:

rtsp://Camera_IP:554/cam/realmonitor?channel=1&subtype=1&unicast=true (if Sub Stream 1 is
enabled in the camera)
rtsp://Camera_IP:554/cam/realmonitor?channel=1&subtype=2&unicast=true (if Sub Stream 2 is

enabled in the camera)
(tested with IPC-HDBW4431E-ASE, FW: 2.460.0000.14.R, Build Date: 2017-07-20)

Hanwha:
rtsp://Camera_IP/profile2/media.smp

(tested with PNO-A6081R, FW: 2.11.02_20210630_R206)

Hikvision:
Main stream:
rtsp://Camera_IP:554/Streaming/Channels/101

Sub stream:
rtsp://Camera_IP:554/Streaming/Channels/102

Summary of Contents for Carmen ANPR BOX




























































Search results

Summary of Contents for Carmen ANPR BOX

Reviews:

Related manuals for Carmen ANPR BOX

Brands by name

Popular brands

Adaptive Recognition Carmen ANPR BOX, Installation And User Manual

Search results

Summary of Contents for Carmen ANPR BOX

Reviews:

Related manuals for Carmen ANPR BOX

Brands by name

Popular brands