Adaptive Micro Systems BetaBrite 1036 Programming Manual Download

Page: 41 / 52

BETA BRITE Programming Manual

Graphics: Example 11 — Creating a movie marquee

Press

RUN

Then press

to save

graphic

Press

SELECT

until a

question mark appears.

Type

as the name of the

next graphics file.

Repeat the previous steps
to draw graphics

and

(Both are just smaller
versions of graphic

)

Use the

COLOR

key to

make all the dots in graphic
B green, and all the dots in
graphic C amber.

NOTE:

In order to display a DOTS graphic, it must be placed in a text message.

In the following steps, we’ll create a text message and add the three DOTS graphics just created.

Press

BACK

until

PROG

TEXT A

appears.

Press

SELECT

until a

question mark appears.

Press

MODE

and then

SELECT

until

[FLS]

(Flash) appears.

Press

SPEED

and then

SELECT

until

[SP5]

appears.

Insert the first DOTS
graphic you created (file A)
by pressing

DOTS

PROG DOTS A

PROG DOTS ?

PROG DOTS B

DOTS graphic

PROG TEXT A

PROG TEXT ?

[FLS]

[FLS][SP5]

[SP5]

is a fast message speed.

The letter

is the name of the graphic file.

FLS][SP5][DOT]

Summary of Contents for BetaBrite 1036





















































Search results

Summary of Contents for BetaBrite 1036

Reviews:

Related manuals for BetaBrite 1036

Brands by name

Popular brands

Adaptive Micro Systems BetaBrite 1036, Programming Manual

Search results

Summary of Contents for BetaBrite 1036

Reviews:

Related manuals for BetaBrite 1036

Brands by name

Popular brands