Adaptivation Randomizer Gamer, Instruction Manual, Page: 6 / 16

6
Playing a Message
1. When finished recording messages, slide the PLAY/RECORD
switch to the PLAY-1 position. Press down on the Randomizer,
and your message will play back. Press down again, and your
next message will play - the Randomizer will provide a randomly
selected message.
2. To access the second level of messages, slide the PLAY/RECORD
switch to the PLAY-2 position.
3. Optionally access your Randomizer by inserting any external
switch with a standard 1/8” (3.5mm) plug into the jack labeled
Ext Switch.
4. On level 1, Randomizers will play back messages at random.
This means that the same message could repeat before other
messages are selected. It’s just like flipping a coin. On level 2, mes-
sages are played back in a pseudo random pattern, also known
as Gamer Selection. That is, no one message will repeat until all
the other messages have played.
5. After all messages have played, the pattern will repeat. If you
want the Randomizer to use a different pattern, switch to the
Play-1 level, play any message, then return to level-2. This will
reset the Gamer random pattern.
Recording a Message
1. Turn on the power by rotating the VOLUME/POWER knob to
mid-position.
2. For level 1, slide the PLAY/RECORD switch to the REC-1 position.
This will record your series of messages into Level-1.
3. Press down on the Randomizer and hold. A beeping cue can be
heard, indicating the device is ready to record. When the beep-
ing stops, speak your message clearly, about twelve inches away,
into the side marked MIC - same side as the speaker. Release
the switch when your message is finished. A continuous beep
indicates that the memory is full for a given level.
4. To record your next message, press and hold the top of the device
while you speak. Repeat steps 2 & 3 until finished recording all
messages.
5. If you want to record on Level-2, slide the PLAY/RECORD switch to
the REC-2 position. Record your messages as you did for Level-1.
Remember to wait until the beeping cue has stopped, before
you start speaking.
6. To re-record messages, simply repeat the above steps.
Levels
can be recorded in any order!
Messages can also be recorded
using an external switch rather than the top of the Randomizer .