Adaptec Ultra Wireless AWN-8060, User Manual

Page: 21 / 45

14
Connecting to the WLAN
Connecting to the WLAN
Before you continue, make sure that you have:
❏
Followed the tips and suggestions provided in Before You Begin
on page 3 .
❏
Installed the Wireless AP. See page 6 .
❏
Installed the Wireless Access Point Utility. See page 8 .
❏
Set the IP address for your Wireless AP. See page 12 .
❏
Opened and logged on to the Utility. See page 13 .
The next step on the Installation Task List (see page 3 ) is to connect
your Wireless AP to your WLAN. Follow the instructions for your
specific WLAN set-up:
■
If you are setting up a new WLAN using only Adaptec Wireless
products, see Using Only Adaptec Wireless Products below.
■
If you are adding your Wireless AP to an existing WLAN or
creating a new WLAN using non-Adaptec brand Wireless
products, see
page 15 .
Using Only Adaptec Wireless Products
You have completed the Installation Task List. (Adaptec Wireless
products are preset to work together on a WLAN.)
See Checking Your Wireless Connections on page 18 for more
information on using your Wireless AP.