Replacing a PCI Card
Snap Server 700i Series
4
Field Service Documentation
Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent
a commitment on the part of Adaptec or any of its subsidiaries.
4
Connect the SAS cable to the card.
5
Replace the expansion cage in the chassis and tighten the two thumbscrews.
Replacing an Ethernet Card
1
Once you have removed the expansion cage from the chassis, insert the NIC into
the appropriate PCI slot, snap it in place, and screw in the PCI card bracket.
2
Replace the expansion cage in the chassis and tighten the two thumbscrews.
Replacing the Top Cover
Be sure to replace the top cover. Do not operate the server if the cover is not in place.
1
Lower the top cover onto the server.
2
From the rear of the server, push the cover forward until it is firmly seated.
3
Replace the screw on the right side of the server.
Restoring Power to the Server
1
If you removed the server from the rack, replace it now with the help of another
person.
2
Reattach all cables to the rear of the server.
3
Push the power button on the front of the server to boot up the server.
NIC PCI slot