Adaptec Snap Server 110 User Manual Download Page 13

Page: 13 / 74

Step 1: Connect Your Server to Your Network and to a Power Source

Chapter 1 Installing the Snap Server

Step 1: Connect Your Server to Your Network and to a

Power Source

You can connect your Snap Server to a 10BaseT, 100BaseTX, or 1000BaseT network.

Connect the server to your network using the Ethernet cable provided.

Insert the power supply retainer clip into the divets above the power connector,

as illustrated in the figure above.

Kensington Lock
Connector

The Kensington Lock slot can be used to secure a Kensington lock
on your Snap Server. For more information about Kensington locks,
see the Kensington Web site at

www.kensington.com

Power Connector

Connect your external power supply to the Power Connector. Then
connect the power cord to an AC power source.

USB Ports (4)

Four USB ports are available for connecting an APC USB UPS, a
USB printer, and a USB tape drive.

Service Port

The service port is for Adaptec technical support use only.

Ethernet Port

Connect the included Ethernet cable to the Ethernet port and then
to an Ethernet outlet.

Connector/Control

Description

Summary of Contents for Snap Server 110











































































Search results

Summary of Contents for Snap Server 110

Reviews:

Related manuals for Snap Server 110

Brands by name

Popular brands

Adaptec Snap Server 110, User Manual

Search results

Summary of Contents for Snap Server 110

Reviews:

Related manuals for Snap Server 110

Brands by name

Popular brands