Adaptec SLIMSCSI 1460, User Manual

Page: 17 / 38

11
Completing the Installation
Completing the SlimSCSI Installation in OS/2
Here is some important information about using the SlimSCSI
adapter in computers running under OS/2:
■
OS/2 must already be installed before you begin these installa-
tion steps. OS/2 does not support installation from a CD-ROM
drive connected to a PC Card such as the SlimSCSI adapter.
■
OS/2 does not support hot-plugging. This means that the
SlimSCSI adapter and the devices connected to it must be
plugged in and powered
ON
before you start OS/2 and that
you cannot remove the adapter (or other PC Cards) while
OS/2 is running.
Follow these steps to complete installation of the SlimSCSI adapter
under OS/2 versions 2.x, 3.0, or 4.0 (Warp).
1
Be sure that the SlimSCSI adapter is inserted in a PC Card slot
and that the SCSI disk drive and/or other SCSI devices are
connected to it and are turned
ON
.
2
Start OS/2.
3
Open the OS/2 System icon, then open the System Setup icon.
Double-click the Selective Install icon.
Note: In version 4.0 (Warp), select the Install/Remove
icon.
4
Click PCMCIA Support, select the PCMCIA system appropri-
ate to your PC, and click OK.
5
Click Install and follow the instructions that appear. (You will
be instructed to insert a series of OS/2 diskettes.)
6
When the installation procedure is completed, click OK.
7
Insert the Windows NT/OS2/Windows 95 Driver diskette in
drive A.