6
You can connect a total of 15 SCSI devices to the Adaptec SCSI Card
29160N. Before connecting devices, be sure to also review Setting Up
SCSI Devices on page 4.
We recommend that you keep your Ultra160-LVD devices
separate from your Ultra devices. Connecting an Ultra
device to the Ultra 160-LVD SCSI connector forces the Ultra160-
LVD SCSI segment and any attached devices to drop down to Ultra
SCSI performance levels. (See
Bus Segments on the Adaptec SCSI
Card 29160N
on page 2.)
N
OTE
Locate the 68-pin internal LVD SCSI cable, as shown below:
C
ONNECTING
SCSI D
EVICES
S
TEP
1
Internal Ultra 160-LVD SCSI Connector
(68-pin)
Connect internal LVD and Ultra 160-LVD devices using the internal
Ultra160-LVD connector. To do this, use a 68-pin internal LVD cable,
similar to the one shown in Step 1 below. Follow these steps to connect
your internal LVD and Ultra160 devices:
Terminator
Connect to Ultra160-LVD and
Ultra2 Devices
Connect to the Adaptec
SCSI Card 29160N
512512final.qxd 12/17/99 2:05 PM Page 6
