4-7
Using Adaptec Storage Manager – Browser Edition
The action buttons are:
■
Logout
—Selecting Logout ends your session and returns you to
the Login screen.
■
Rescan
—Used to rescan the configuration of the system.
Typically, when a rescan is required, it occurs automatically, for
example, after an array is created.
However, the system configuration can change without
Adaptec Storage Manager being notified. For example, drives
that are inserted or removed from a nonintelligent enclosure or
an enclosure powered on after you logged into Adaptec Storage
Manager would not be displayed unless you manually rescan.
The remaining buttons open additional windows that provide
more detailed information and allow you to perform actions or
change settings on a specific aspect of your storage subsystem.
These are:
■
Events
■
Options
■
Help
■
Properties
■
Tasks
Immediately following the header frame is a controller information
line including the model number of the first Adaptec RAID
controller found in the system and the amount of cache memory (if
any) installed on that controller.
Beneath the controller information are Physical Devices and
Logical Devices views that show connected devices and existing
arrays on this controller. Controller information and device views
are repeated for each additional Adaptec RAID controller in the
system.
Select the controller by clicking anywhere on the controller
information. When the controller is selected, the Events, Properties
and Tasks buttons change from blue to amber, indicating that
clicking any of them will display an additional window with
information and options specific to this controller.
