4
Once the USB2connect is installed in your system, complete the
following steps.
Windows® Installation
Power up the computer. During the operating system startup, the
card will automatically be detected and Windows will load an
embedded driver for the card. If your system prompts you to
restart the computer, do so.
If the
New Hardware Found Wizard
opens when you restart,
review the
User’s Guide
on your USB2connect CD for more
information.
Review the
Windows Device Manager
to verify that the adapter is
installed under the
USB Host Controller
section. See the
User’s
Guide
on your CD for more information.
Macintosh® Installation
Power up the computer. Insert the USB2connect CD into your
Macintosh CD-ROM drive.
Double-click the
Start Installation Here
file on your Installation
CD.
Follow the instructions to install the latest Macintosh USB
drivers, if necessary.
Double-click the
USB2connect Installer
and follow the on-screen
instructions.
After the installation is complete, click
Restart
to reboot your
Macintosh, if necessary, and have the new settings take effect. See
the
User’s Guide
on the CD for details.
C
OMPLETING
THE
I
NSTALLATION
S
TEP
1
S
TEP
2
S
TEP
3
S
TEP
1
S
TEP
2
S
TEP
3
S
TEP
4
S
TEP
5
USB20_IG.fm Page 4 Tuesday, March 27, 2001 4:53 PM
