2-6
ARO-1130SA Installation and Hardware Guide
Completing the Installation
Once the ARO-1130SA is installed in your server, refer to the docu-
mentation that came with your computer and SCSI devices for spe-
cific instructions on setting up your SCSI devices and connecting
them to the SCSI connectors on the motherboard.
Note:
If you refer to the computer’s documentation for
installation instructions, be sure to return to this document
for instructions on running the Array1000xA BIOS & Driver
Selection Utility and installing the software included in the
package.
In most cases, it is not necessary to run the SCSISelect
®
utility.
Should you need to configure SCSI options (e.g., ID, Parity Check-
ing, and Termination), see Appendix A, Configuring ARO-1130SA
with the SCSISelect Utility.
❒