Adaptec AAA-130U2 SERIES, Hardware Manual, Page: 51 / 82

5-1
è
▼ ▼ ▼ ▼
Installing the Software
Driver for Novell NetWare
In this Chapter
This chapter explains how to install the AAA-131U2/133U2 soft-
ware driver (
cda1000h.ham
) for Novell NetWare (NetWare 4.11, 4.2,
and 5.0). Before installing the driver, make sure you have completed
the following:
■
Installed the AAA-131U2/133U2 in your system
(See Chapter 2)
■
Created the first array using the ARRAYCONFIG U2 utility, if
you plan to boot from an array. (See Chapter 3)
Once NetWare and the driver are installed, install Adaptec CI/O
Management Software from the server console (CI/O is required for
array management in order to provide the proper level of fault
tolerance and event notification). Refer to the Adaptec CI/O Manage-
ment Software User’s Guide
for instructions on installing and using the
software.
➤
Installing the Array1000U2 Driver for Novell NetWare
5-2
➤
Netware Installation and Configuration Notes 5-8