Adaptec AAA-130U2 SERIES, Hardware Manual, Page: 33 / 82

2-19
Installing the Hardware
Configuring the AAA-131U2/133U2
After connecting all devices, reinstall the computer cover and con-
nect all power cables. Turn on the external SCSI devices first, and
then turn on the computer. During BIOS initialization, the
AAA-131U2/133U2 BIOS banner should appear on the screen, and
each device connected to the adapter should be listed. If the BIOS
banner does not appear, see Appendix B, Troubleshooting.
Before installing the drivers and software for the AAA-131U2/
133U2 RAID card, you may want to configure SCSI options (e.g., ID,
Parity Checking, and Termination) for the card and the SCSI devices
connected to it by running the onboard SCSISelect utility. To do this
press F6 when the following prompt appears during BIOS
initialization:
Press <F6> for SCSISelect (TM) Utility!
In most cases, it is not necessary to run the SCSISelect utility. Should
you need to configure SCSI options, see Appendix A, Using SCSISelect
and Disk Utilities for additional information.
❒