1
SANbloc S50 SAS JBOD Quick Install Guide
SANbloc S50 SAS JBOD Quick
Install Guide
This Quick Installation Guide describes how to install and connect the
Adaptec SANbloc S50 SAS JBOD enclosure. This enclosure supports up
to 12 Serial Attached SCSI (SAS) or 12 Serial ATA (SATA) disk drives.
For more information, including supported enclosure configurations,
refer to the
Adaptec SANbloc S50 SAS JBOD Enclosure User’s Guide
on the
CD.
Kit Contents
• SANbloc S50 SAS JBOD enclosure
• Two power cables
• Rackmount kit
• CD, including software and product documents
Installation Checklist
1
Plan the installation (see “Preparing for Installation” on page 2).
2
Optional—Install the enclosure in an equipment rack (see “Installing
Your Enclosure into a Rack” on page 2).
3
Install the disk drives (see “Installing the Disk Drives” on page 5).
4
Connect the enclosure (see “Connecting the Enclosure” on page 8).
5
Power on (see “Powering On” on page 10).
6
Register your enclosure (see “Registering Your SANbloc S50
Enclosure” on page 11).
Summary of Contents for 5325302040 - Sanbloc S50 Single Jbod 1.2TB 15K Sas
Page 19: ......
