Adaptec 5325301638 - Snap Server 4500 NAS, Administrator'S Manual

Page: 112 / 148

Networking Issues
98 Snap Server Administrator Guide
You Cannot Log in as root to the Snap Server
The root account password is tied to the admin accout password. If you cannot log
in as root, change the password for the admin account on the
System > General
Settings screen. Use the admin password to log in as root.
Snap Disk 10 Disk Drives do not Appear on the Storage > Devices screen.
Verify that the Snap Disk 10 is connected properly to the Serial ATA connector at
the rear of the Snap Server 4500 and that the expansion array is properly connected
to the power supply. Then, to initialize the Snap Disk 10, power off and then power
on the Snap Server 4500.
Caution
Make sure to use a screwdriver to firmly seat the connectors on the Snap
Disk 10 and the Snap Server 4500. Tightening the connectors by hand will not work.
Safari 1.0.2 on MacOS 10.2.x Unexpectedly Crashes
This Safari issue has been resolved in MacOS 10.3.x, upgrading your MacOS to
10.3.x or later will install an updated version of Safari and resolve this issue.
The S2S Managemenent Console does not Start Successfully
You must allow popups on your client when connected to the Snap Server to view
some error messages and to allow the management console to run.
You must also have the latest Java Virtual Machine (JVM) installed on your client to
support S2S.
Tip
The JVM which installs as a part of the Snap Server Manager installation
process will properly support S2S. If you have not already installed SSM on your
client, it can be installed from your User CD or the Snap Appliance download site.
In some netowrk configurations, name resolution may be failing to allow the VM in
teh browser to successfully allow the management console to load. Reauthenticate
to the Snap Server via IP address rather than server name.
The Snap Server Manager or S2S Installer does not work using Internet
Explorer on Windows 2003 Server
The default security settings do not allow active-X components to run. You must
download the package to successfully complete the installation on Windows 2003.