Adaptec Storage Enclosure 335SAS
●
10
Installation Checklist
To install the Adaptec 335SAS enclosure, complete these tasks:
❏
Work through the steps in
Before You Begin
(see
page 10
).
❏
Install disk drives into the enclosure (see
page 11
).
❏
Optional:
Remove the fan (see
page 12
).
❏
Install the enclosure into your computer (see
page 14
).
❏
Connect the enclosure to a controller (see
page 15
).
❏
Connect the power cables and the LED or I2C cable (see
page 18
).
Before You Begin
Before you begin, complete these preinstallation tasks:
1
Install a SAS or SATA controller and device drivers into your
computer. For instructions, refer to the controller’s documentation.
2
Remove all components from the packaging and inspect them. Place
on an antistatic surface until you are ready to use them.
3
If you are using new disk drives, follow the manufacturer’s
installation instructions.
4
Take appropriate safety precautions to protect yourself and your
equipment.
Caution:
Before touching any of the enclosure components,
ground yourself and take ESD precautions. Use an antistatic
wrist strap and a grounding wire as a minimum precaution.
You will need a Phillips screwdriver to complete the installation.
!
