Adaptec 2940UW PRO, User Manual, Page: 25 / 38

15
Configuring the SCSI Card 2940UW Pro with SCSISelect
Starting SCSI
Select
Follow these steps to start SCSI Select :
1
Turn on or restart your system.
During the startup process, read all messages that appear on
your screen.
2
When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3
From the menu that appears, use the
↑
and
↓
keys to move the
cursor to the option you want to select, then press
Enter
.
Note:
If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This feature
may not work on all monitors.)
Exiting SCSI Select
Follow these steps to exit SCSI Select :
1
Press Esc until a message prompts you to exit. (If you changed
any settings, you are prompted to save the changes before you
exit.)
2
At the prompt, select Yes to exit, then press any key to reboot
the computer. Any changes you made in SCSI Select take effect
after the computer boots.